How to improve the effect of high speed glue spraying machine bonding PC lampshade
This time we will introduce the PC lampshade bonding link and operation mode. PC is polycarbonate. The lampshade made of this material has good impact resistance, heat resistance and low temperature resistance, meeting the requirements of covering the heating lamp source. The connecting surface of the lampshade needs to be glued together.
Release Date:
2018-09-25
This time we will introduce the PC lampshade bonding link and operation mode. PC is polycarbonate. The lampshade made of this material has good impact resistance, heat resistance and low temperature resistance, meeting the requirements of covering the heating lamp source. The connecting surface of the lampshade needs to be glued together.
This time we will introduce the PC lampshade bonding link and operation mode. PC is polycarbonate. The lampshade made of this material has good impact resistance, heat resistance and low temperature resistance, meeting the requirements of covering the heating lamp source. The connecting surface of the lampshade needs glue, that is, a layer of glue is coated on the small covering groove of the PC lampshade to achieve the effect of further strengthening and stability. Of course, the choice of the type of glue spraying machine also needs to meet the needs of this production. We suggest that the high-speed glue spraying machine that meets the supporting requirements be put into production.
High speed glue spraying machine is an automation equipment with excellent performance and relatively wide application range. It has many application characteristics that many equipment do not have. Through the setting, the high-speed glue spraying machine can begin to complete the path filling and coating of semi-finished parts, less manpower investment, easier and more convenient to use. After installing the fixture in line with the lampshade, you can start the PC lampshade bonding process. The adhesive used is a special adhesive with low viscosity and high fluidity. It will be initially cured after 5 minutes of spot coating, giving operators a certain degree of protection.
The glue point and path of the connecting position are set in the external controller of the high-speed glue spraying machine, and the glue valve matching with the glue is selected to control the glue out. Dust or foreign matter that may exist at the outer end of the bonding surface should be removed before turning on the PC light.
The gluing effect meets the requirements. After bonding the connecting surface, two PC lampshades can be bonded. Appropriate pressure can be applied from top to bottom to make the contact more dense, and it takes 24 hours to reach full curing strength.
Due to the strong fluidity of the glue used for bonding PC lampshade, if there is no supporting fixture fixed, dispensing may be offset or dislocation.
The above is the introduction of how to improve the effect of high-speed glue spraying machine bonding PC lampshade, I hope to help you!
Next
Next
Dongguan Guo Hao Electronic Equipment Co.,ltd.
Phone: 86-769-85440883 / 769-85319060 / 769-85334517
Fax: 0769-85309962 0769-85319070
Email: zp@dg-guohao.com
Address: No. 6, Shatou Industrial Road, Chang'an Town, Dongguan City, Guangdong Province
Follow us
Copyright © Dongguan Guo Hao Electronic Equipment Co.,ltd.